ESU Analyser

ESU Analyser - for Complex Waveforms - and Multi-Pulse Analysis - Internal Loads (0-6400 Ohm)

DA-ESU-2400H

The ESU-2400H offers an unprecedented buffer depth of over 16 million samples. This allows for ultra-stable measurements of ESU Generator output waveforms and provides futureproofing for new generator output modes such as multiple pulsed waveforms.

The ESU-2400H uses the same base platform as the ESU-2400. This means that you can upgrade your existing analyser without having to purchase a whole new unit. You have the freedom to get started with the ESU-2400 and then upgrade as the need arises.

BG 1 100 2 1
e bike tick icon

Measure advanced generator outputs with pulsed RF at up to three different amplitudes

e bike tick icon

Based upon years of collaborative work with leading electrosurgery industry manufacturers

e bike tick icon

The industry’s most comprehensive and most accurate full-featured analyser

e bike tick icon

Industry standard RF current measurement

e bike tick icon

DFA© Technology Ultra high speed digitisation of complex RF waveforms

e bike tick icon

Compatible with the latest ESU generator platforms

e bike tick icon

Continuous and pulsed output waveform compatible

e bike tick icon

Embedded real-time operating system with VGA colour touch screen display

e bike tick icon

Displays up to 15 different measurement parameters with user selectable and definable screens

e bike tick icon

Internal precision test loads from 0 ohms to 6400 ohms in 1 ohms increments

ESU Analyser - Very High Accuracy - Pulse Measurement - Internal Loads (0-6400 Ohm)

ESU-2400

The Model ESU-2400 Electrosurgical Unit Analyser is a high-accuracy, true RMS RF measurement system designed to be used in the calibration and routine performance verification of Electrosurgical Generators. It offers a higher degree of accuracy than previously attainable with conventional Electrosurgical Unit Analyser designs. The ESU-2400 provides an advanced low reactance internal load bank with a range of 0 to 6400 ohms in 1-ohm increments. It is microprocessor-based and utilises a combination of unique hardware and software to provide accurate and reliable test results, even from “noisy” ESU Generator waveforms such as “Spray”. The Patent Pending DFA® Technology utilised in the ESU-2400 allows the system to aggressively digitise the complex RF waveforms produced by Electrosurgical Generators, analyse each individual digital data point, and provide highly accurate measurement results.

BG 1 100 3 1

The ESU-2400, unlike many conventional ESU Analysers, has internal HV setup relays to control the measurement path, allowing the user to switch between power measurements, leakage measurements, CQM/RECQM/ARM testing or even run an auto sequence that could include any or all of these tests – without even moving wires around.

The current transformer internal to the ESU-2400 senses the RF current flowing through the internal test load and produces a ratio-metric voltage which is digitised and analysed by the microprocessor. Combining the standard and low ranges of the ESU-2400 with the use of the current transformer, the user has full control over the ability to get high accuracy and high resolution readings from all types of Electrosurgical Generators.

The following are some of the main features:

e bike tick icon

True RMS readings using DFA® technology

e bike tick icon

Industry standard current sensing technology

e bike tick icon

mV, mV peak, ma, crest factor and power (wattage) ranges

e bike tick icon

Color QVGA display with touchscreen

e bike tick icon

1% of reading measurement accuracy

e bike tick icon

Digital calibration – no pots to turn

e bike tick icon

Selectable display options

e bike tick icon

Graphical on-screen representation of measured RF signal

e bike tick icon

Standard (1000 mV) and low range (100 mV) with autoscaling capability

e bike tick icon

Pulsed RF waveform measurement mode for low duty cycle pulsed outputs offered by some electrosurgical manufacturers

ESU Analyser - High Accuracy - Portable - Internal Loads (0-5500 Ohm)

ESU-2350

The ESU-2350 Electrosurgical Unit Analyser is a high-accuracy, true RMS RF measurement system designed to be used in the calibration and routine performance verification of Electrosurgical Generators. It offers a higher degree of accuracy than previously attainable with conventional Electrosurgical Unit Analyser designs.

The ESU-2350 provides an internal load bank with a range of 0 to 5500 Ω in 5 Ω increments. It is microprocessor based and utilises a combination of unique hardware and software to provide accurate and reliable test results, even from “noisy” Electrosurgical Generator waveforms such as “Spray”. The DFA 2™ Technology utilised in the ESU-2350 allows the system to aggressively digitise the RF waveforms produced by Electrosurgical Generators, analyse each individual digital data point, and provide highly accurate measurement results.

BG 1 100 4 1
e bike tick icon

Industry Standard RF Current Measurement

e bike tick icon

Displays Up to 9 Different Measurement Parameters with User Selectable and Definable Screens

e bike tick icon

Internal Precision Test Loads From 0 Ω to 5500 Ω in 5 Ω Increments

e bike tick icon

Power Load Curves with Multiple Power Settings Per Load Setting

e bike tick icon

User-Definable Testing Sequences

e bike tick icon

Print test Reports to PDF format

e bike tick icon

Automatic or Manual Activation of ESU Generator During Power Load Curve Tests

e bike tick icon

100% Compatible with Covidien/ Valleylab ForceTriad™, FT10™ and Ligasure™ Generators, and All Legacy Generators by Other Manufacturers

e bike tick icon

REM/ARM/CQM Testing Via 500 Ω Adjustable Load in 1 Ω Increments

e bike tick icon

RF Leakage Current Measurement

ESU Analyser - High Accuracy - Portable - Internal Loads (50-750 Ohm)

ESU-2300

The ESU-2300 is an Electrosurgical Analyser. The “measurement engine” of the ESU-2300 is a specially-engineered true-RMS RF ammeter and wattmeter, designed to measure the complex RF waveforms produced by electrosurgical generators. The ESU-2300 has been designed to comply with electrosurgical manufacturer industry standard current sensing technology and utilises an internal precision RF Current Transformer. The analyser utilises a precision internal test load resistor network. The ESU-2300 is intended to be routinely used to measure the various parameters relating to the testing and performance validation of electrosurgical generators. DFA® Technology allows the ESU-2300 to aggressively digitise the complex electrosurgical generator waveform, analyse its components and provide accurate and stable results. It may be used as a stand-alone meter or in conjunction with a PC utilising the optional software.

BG 1 100 5 1
e bike tick icon

True RMS readings using patent pending DFA® technology

e bike tick icon

Industry standard current sensing technology

e bike tick icon

mV, mV peak, crest factor and power (wattage) ranges

e bike tick icon

RF current (mA) and power (watts) can be displayed

e bike tick icon

Internal precision load resistor network: 50 ohms to 750 ohms in 50 ohm increments External load resistor capability – uses the external resistor value as a discrete value or add it to any internal load resistor value

e bike tick icon

2.5% of reading accuracy on RF current (mA)

e bike tick icon

5% of reading accuracy on RF power (watts)

e bike tick icon

Internal load resistor network is cooled with temperature and power controlled cooling fan

e bike tick icon

Uses an internal 0.1:1 ratio precision RF current transformer

e bike tick icon

RF leakage measurements through 200 W test load

e bike tick icon

Internal rechargeable battery allows operation independent of line power

e bike tick icon

Large graphics display with cursor selection of options and setup of parameters

e bike tick icon

Digital data output via USB

e bike tick icon

Remote capabilities using RS-232 and USB

e bike tick icon

PC based interface program optional

e bike tick icon

Digital calibration – no pots to turn

e bike tick icon

Selectable display options

e bike tick icon

Tactile keys with audio feedback

e bike tick icon

Independent CQM (REM/ARM) resistor network: 1 ohm to 500 ohms in 1-ohm increments

ESU Analyser - Very High Accuracy - External Loads

ESU-2050

The ESU-2050 ESU Analyser was the first instrument of its kind. Designed through extensive collaboration with several of the world’s leading electrosurgery generator manufacturers (including the worldwide market leader), the ESU-2050 is a highly accurate, calibration-quality instrument intended for use by OEM factory technicians and field service engineers. It can also be used by customers who desire to test their ESU generators in the exact same way the medical device manufacturers do. BC Biomedical’s DFA ESU Analysers are the only analysers with a 1% reading level of accuracy.

BG 1 100 6 1

Calibration quality analysers use external precision non-inductive test loads and wide band current transformer. Standard model is compatible with all legacy generators with continuous output waveforms, and with the latest technology generators such as the Covidien Force Triad, Ligasure Blood Vessel Dealing generator, etc. The standard model is NOT compatible with generators that produce pulsed output waveforms.

This device requires a Pearson Coil and External Resistors (not included).

• A BC20-00230 Pearson CT 4100 1:1 OR a BC20-00231 Pearson CT 411 0.1:1 (most commonly used) is needed. You will also need to purchase one or more Precision Resistors depending on the ESU platform you are testing.

• A CQM-2000 is helpful if you do not have another means of testing CQM/REM/ARM.

ESU-2050 Highlights:

e bike tick icon

True RMS readings using DFA® Technology

e bike tick icon

1% measurement accuracy

e bike tick icon

Uses external current transformer & loads

e bike tick icon

mV, mV Peak, mA, crest factor & wattage displays

e bike tick icon

Waveform capture, storage, display & download

e bike tick icon

Graphic display with bright white backlight

e bike tick icon

Price Includes: Universal Power Supply, Soft Carrying Case, RS-232 & USB Communication Cables, BNC to BNC Cable (3-foot) for current

e bike tick icon

Transformer connection, PC utility software

ESU Analyser - Very High Accuracy - Pulse Measurement - External Loads

ESU-2050P

The BC Biomedical ESU-2050P adds a Pulse Mode to the ESU-2050.

The ESU-2050 ESU Analyser is the first instrument of its kind. Designed through extensive collaboration with several of the world’s leading electrosurgery generator manufacturers (including the worldwide market leader), the ESU-2050 is a highly accurate calibration-quality instrument intended for use by OEM factory technicians and field service engineers. Customers who desire to test their ESU generators in the exact same way the medical device manufacturers do can also use it. It is one of the only ESU Analyser’s with a 1% reading level of accuracy.

BG 1 100 6 1

The calibration quality analyser uses external precision non-inductive test loads and wide band current transformer. The standard model is compatible with all legacy generators with continuous output waveforms, and with the latest technology generators such as the Covidien Force Triad©, Ligasure Blood Vessel Dealing generator, etc. The standard model is NOT compatible with generators that produce pulsed output waveforms.

This device requires a Pearson Coil and External Resistors (not included).

The ESU-2050 requires the following items that are not included with the test equipment purchase:
• A BC20-00230 Pearson CT 4100 1:1 OR a BC20-00231 Pearson CT 411 0.1:1 (most commonly used) is needed. You will also need to purchase one or more Precision Resistors depending on the ESU platform you are testing.
• A CQM-2000 is helpful if you do not have another means of testing CQM/REM/ARM.

ESU-2050P Features:

e bike tick icon

True RMS readings using DFA® Technology

e bike tick icon

1% measurement accuracy

e bike tick icon

Uses external current transformer & loads

e bike tick icon

mV, mV Peak, mA, crest factor & wattage displays

e bike tick icon

Waveform capture, storage, display & download

e bike tick icon

Graphical display with bright white backlight

e bike tick icon

Price includes: Universal Power Supply, Soft Carrying Case, RS-232 & USB Communication Cables, BNC to BNC Cable (3-foot) for Current

e bike tick icon

Transformer connection, PC utility software

ForceTriad© PM Procedure Using ESU-2400 Auto sequence:

 

Covidien Valleylab FT10© PM Procedure Using ESU-2400 Auto sequence:

OK
Key Health Solutions is an authorised Sales and Service provider for LEC Fridges and Freezers. Please contact us for discounted prices.
Key Health Solutions is an authorised Sales and Service provider for LEC Fridges and Freezers. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Labcold Fridges and Freezers. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Labcold Fridges and Freezers. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Daray Medical Fridges and Freezers. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Daray Medical Fridges and Freezers. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Medi-Plinth. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Medi-Plinth. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Plinth Medical. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Plinth Medical. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for BD. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for BD. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Marsden. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Marsden. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Seca. Please contact us for discounted prices.
OK
Key Health Solutions is an authorised Sales and Service provider for Seca. Please contact us for discounted prices.
OK